LC-DC0808
8-channel push button interface
- 8 Input parametrized individually
- 8 Output parametrized individually
- Programmable contacts normally open or normally closed
- Can be 4 input and 4 output for 5v Led status
- Long press function available
- Long press interval in seconds programmable
- Switch function
- Button function
- Dimmer function
- Blind and shutter function
- Scene function
Data Sheet
- LC-DC0808 is a 8-channels push button interface used to acquire external commands.
- The device is equipped with a 15 cm long cable, on which there are 8 pairs of wires for direct connection to the push buttons.
- The wires are colored to facilitate the recognition of the channels.
- Inputs are individually configurable with ETS to perform the desired function by the designer.
- The device provides control functions for load control, the opening and closing of shutters, the adjustment of a light source and the selection of scenarios.
- Connection to the BUS: coupling terminal, 2 pins, d=0,8 mm
- Some of these functions exploit the possibility of recognizing the prolonged closure of the auxiliary contact to carry out the command desired