LC-A0406
4 Chanel malfunction
The LC-DALIGW01 gateway is a completely new device that allows the connection of a KNX line to a DALI line.
LC-DALIGW01 operates as a “master” on the DALI and has the traditional 16-18 V dc output on the terminals named D+ and D- and a maximum current limitation of 250 mA. It allows the control and regulation of up to 64 DALI devices, managed individually or in groups of up to 16. The device also allows the management of up to 16 scenarios.
Error messages from individual ballasts and lamps can be transmitted to the KNX via appropriate communication objects. It is possible to control individual DALI devices even if they are assigned to different groups. One DALI device can be part of several groups. It has a post-installation function for the modification of installations already in service. It also includes advanced programming functions for DALI driver addresses.
It is possible to configure the device via ETS or via the DCA interface that can be downloaded from the KNX or Light control website.
Data Sheet
- Supply voltage: 100 ÷ 240 V ac, 50/60 Hz
- Outputs: DALI D+, D-, 16 ÷ 18 V dc, 250 mA max, short circuit proof
- Interfaces: KNX, DALI
- Type: Control device (single master)
- Compatible with led lamp drivers (DT6)
- Operating Temperature: -5 ÷ +45 °C (internal use)
- Connection to the BUS: coupling terminal, 2 pins, d=0,8 mm
- Electric connections: screw terminals for power supply and DALI, 1,5 ÷ 2,5 mm2
- Degree of protection: IP 20
- Dimensions: 4 DIN modules