LC-PBS8W
8/4 -channel push button interface
- Supports NFC and ETS to configure button label content;
- Switch function, which can be used to turn on/off lighting, with long press, short press and inversion functions;
- Dimming function, which controls dimming devices, with relative dimming and absolute dimming functions;
- Curtain control function, which can control open & close curtains, the raising and lowering of projection screens, etc.;
- Value sending, which can send 1bit/1byte values;
- Scene control function, which can perform 8bit scene control and call the set scene number;
- Shift register, sends values in the form of shift register;
- RGB & RGBW control, which can be controlled by long press or short press;
- Multiple operation function, which can send different values at the same time and call different types of functions in one operation;
- Delayed value sending, which sends a value or does not send it during operation, and sends another value after a delay;
- The leters and numbers this are the way in the ETS File to program the NFC push buttons
Data Sheet
- Number of Rockers Number of – 8
- bi colored LED – 8
- KNX bus connection terminal – KNX BUS
- Power Consumption KNX bus type – <0.3W
- Operation temperature range – 0 To 45c
- Dimensions(W x H x D) – 85/85/26.6 mm